LeClerc Compact 24" Loom
24" Weaving Width This jack-type floor loom is light but solid and easily moveable when folded. It is designed for workshops and demonstrations. To fold, slightly unscrew the two handles on the sides of the loom and slide them up. It can be folded easily even after weaving has started.The Compact loom is built with six treadles for easy tie-up, and can be converted into an 8 shaft loom, by adding 4 shafts (and 4 treadles).It is equipped with a 1 7/8" (4 cm) regular plain beam, to which a set of rake-like pieces (sectional warp beam) can be added. The rake-like pieces must be screwed directly on the beam. Without an extension, the circumference of the sectional warp beam is 15" (38 cm
STANDARD EQUIPMENT » Steel reed, 12 dents/inch (5dents/cm) » 10½" (26.8 cm) wire heddles » 1 boat shuttle 6122-1000 » 1 reed and heddle hook 6141-7000 » 2 lease sticks and 2 warp rods » 10 loop cords for lashing » Assembly instructions and Video » Book "Warp and Weave"
24" Weaving Width This jack-type floor loom is light but solid and easily moveable when folded. It is designed for workshops and demonstrations. To fold, slightly unscrew the two handles on the sides of the loom and slide them up. It can be folded easily even after weaving has started.The Compact loom is built with six treadles for easy tie-up, and can be converted into an 8 shaft loom, by adding 4 shafts (and 4 treadles).It is equipped with a 1 7/8" (4 cm) regular plain beam, to which a set of rake-like pieces (sectional warp beam) can be added. The rake-like pieces must be screwed directly on the beam. Without an extension, the circumference of the sectional warp beam is 15" (38 cm
STANDARD EQUIPMENT » Steel reed, 12 dents/inch (5dents/cm) » 10½" (26.8 cm) wire heddles » 1 boat shuttle 6122-1000 » 1 reed and heddle hook 6141-7000 » 2 lease sticks and 2 warp rods » 10 loop cords for lashing » Assembly instructions and Video » Book "Warp and Weave"
24" Weaving Width This jack-type floor loom is light but solid and easily moveable when folded. It is designed for workshops and demonstrations. To fold, slightly unscrew the two handles on the sides of the loom and slide them up. It can be folded easily even after weaving has started.The Compact loom is built with six treadles for easy tie-up, and can be converted into an 8 shaft loom, by adding 4 shafts (and 4 treadles).It is equipped with a 1 7/8" (4 cm) regular plain beam, to which a set of rake-like pieces (sectional warp beam) can be added. The rake-like pieces must be screwed directly on the beam. Without an extension, the circumference of the sectional warp beam is 15" (38 cm
STANDARD EQUIPMENT » Steel reed, 12 dents/inch (5dents/cm) » 10½" (26.8 cm) wire heddles » 1 boat shuttle 6122-1000 » 1 reed and heddle hook 6141-7000 » 2 lease sticks and 2 warp rods » 10 loop cords for lashing » Assembly instructions and Video » Book "Warp and Weave"